Revised Content:

Whole house water filter systems are designed to be installed on the main water line entering your home, effectively removing rust, sediment, chlorine, and other chemical contaminants from all the water that flows into your residence. This means that no matter where you are in your house – whether it's the guest bedroom shower, the outdoor hose, the kitchen sink, or the bathroom – you and your family can enjoy clean, healthy, and great-tasting water.

These filters not only provide the luxury of clean, great-tasting water from every faucet, but they can also help extend the life of water-using appliances, such as dishwashers, water heaters, and washing machines. By removing sediment, chlorine, and other contaminants, these filters prevent the buildup of damaging particles that would otherwise enter and potentially compromise the performance of these appliances.

Specifications and Features: - Actual Size: 9 3/4 inches (length) x 4 1/2 inches (outside diameter) - Media: Pleated Polyester - Filter Life: 6 months - Micron: 30 Nominal - Flow Rate: 10 GPM - Designed to Fit: Most standard 10 x 5-inch housings

Contaminants Removed: - Dirt - Particles - Sediment

Comparable Part Numbers: - 155101-43 - Pentek 155101-43 - Pentek R30-BB - PENTEK-R30-BB - R30-BB

Easy Installation: 1. Turn off the water supply and press the red pressure-relief button (if present). 2. Unscrew the housing, remove the large o-ring, wipe it clean, and set it aside. 3. Discard the used filter cartridge. Wash the housing with dish soap and warm water using a nonabrasive sponge or cloth, then rinse thoroughly. Fill the housing 1/3 with water, add about 1 tablespoon of bleach, and scrub to disinfect. Rinse thoroughly. 4. Lubricate the o-ring with clean silicone grease and ensure it is seated level in the groove. 5. Insert the new filter cartridge. 6. Screw the housing onto the cap and hand-tighten. Do not over-tighten. Make sure the cap standpipe slips into the cartridge. 7. Turn on the water supply, press the pressure-relief button (if present), and check for leaks before leaving the installation.

Reasons to Invest in a Sediment Reducing Filter: Sediment in drinking water is not necessarily harmful to humans or pets, but it can be an indication of lead or iron contamination, which can cause serious health issues. If you suspect lead in your pipes, get your water tested. Sediment filters help protect other appliances and possessions from the harmful effects of particles, which can cause staining, spots, and wear and deterioration on pipes and appliances. If other filtration media are already in place, sediment filters can serve as a first layer of defense, increasing the lifetime of your other filters by reducing the number of particles and contaminants that would otherwise wear on them.

Compatible Replacement: This 30 Micron, 10 x 4.5 sediment water filter is a replacement for Pentek R30-BB, 155101-43, RS6, SPC-45-1030, and fits most 10-inch water filter housings.

High Quality Filtration: The high-capacity pleated polyester sediment filter is able to achieve filtration down to 30 microns, improving water quality at a flow rate of 10 GPM, and reducing sediment, dirt, sand, and particles.

6 Month Filter Life: Depending on the quality of your water, replacing your home water filter cartridge every 6 months is recommended for the average household to ensure optimal performance.

Durable Materials and Design: Tier1 products undergo strict quality assurance testing and are manufactured using the highest quality materials.

Quick & Easy Installation: Simple and easy universal fit into your 10 x 4.5 Inch whole house water filter system.

product information: